Select Page

EST310 Piezoresistive Pressure Transmitters

Clear

EST310 Piezoresistive Pressure Transmitters

EST310 pressure transmitter is widely used in the civil and industrial sectors for the pressure measurement of gas and liquid, including water, oil, light corrosive liquid and gas. Adopting the 1Cr18Ni9Ti stainless steel construction, the active sensing element of global brands, and the instrumentation amplifier specially designed for sensor, EST310 enables accurate zero and span calibration. Apart from dozens models of standard construction and outputs, our team is ready to customize the products based on the needs so as to meet the demands for batch applications.

Features

  • Pressure type: Gauge/Seal gauge Pressure
  • Range: 0~0.2MPa…60MPa
  • Accuracy: ±5%F.S
  • Stability: 0.25%F.S/Year (typical), 0.4%F.S/Year (maximum)
  • Signal Output: 4~20mA, 0/1~5V, 0.5~4.5V, 0~10V
  • Power supply: 10/11~30Vdc, 8~30Vdc, 5V(ratio)
  • OEM: Available
RangeOverloadPrecisionStabilityWorking TemperatureInsulationElectric Strength
0~0.2MPa...60MPa1.5 times±0.25%F.S, ±0.5%F.S0.25~0.5%F.S/Y-40~85℃>100M Ω @50V500V@60 second
Output SignalPower Supply
-4~20mA10~30Vdc
-0~5Vdc8~30Vdc
-1~5Vdc8~30Vdc
-0.5~4.5Vdc5V (Ratio)
-0~10Vdc11~30Vdc

Application

Gas dispenser | Refrigerator | Hydraulic lubrication | Constant pressure water supply | Line pressure | Pressure vessel | Petrochemical | Industrial process control

Technology

Piezoresistive based transducers rely on the piezoresistive effect which occurs when the electrical resistance of a material changes in response to applied mechanical strain. In metals, this effect is realized when the change in geometry with applied mechanical strain results in a small increase or decrease in the resistance of the metal. The piezoresistive effect in silicon is due primarily to changes at the atomic level and is approximately two orders of magnitude larger than in metals.

Sputter deposited thin film pressure sensor is a kind of Piezoresistive pressure sensors, difference exist that the thin-film sensor consists of a resistor pattern that is vaporized or sputter-deposited  onto the force-summing element (the measuring diaphragm). In some transducers the resistors are not directly mounted on the diaphragm but are on a beam linked to the diaphragm by a push rod.

Accuracy and range for EST 3 series

eastsensor accuracy map

eastsensor map map

Click to download

  • General Instruction and Datasheet-EST310 GID-3-EV01
  • Product Enquiry